download mapping settings for traktor kontrol s8 for traktor pro 3

Set the channel toggle switch on the top panel to either PH (Phono) or LN (Line) in correspondance to the external device you connected in step 1.

Make sure to connect the output cable (left and right) of your external audio device to either the LINE (CD player, drum machine, etc) or PHONO (turntable) sockets in the INPUT section of the TRAKTOR KONTROL Z2 rear panel.Read more about Phono Gain level settings in the AUDIO 4 / 8 DJ user manual. On a Mac, the Control Panel can be displayed from the drop-down menu below its icon appearing on the top bar of the Desktop. Additionally on the AUDIO 4 / 8 DJ you can adjust the Phono input gain levels in dB from within its Control Panel. Note: Channels C(5,6) and D(7,8) of the AUDIO 8 DJ only offer the LINE input level. Select Phono or Timecode CD / Line from the drop-down menu under channels A(1,2) and B(3,4).Additionally, INPUT CHANNEL D shares its input channel with the microphone ( MIC) input so that a microphone and an external audio source cannot be used at the same time on this channel. The additional THRU / USB switch on INPUT CHANNEL D must be set to USB. Note: The older generation TRAKTOR KONTROL MK1 model offers this switch functionality on the rear panel for INPUT CHANNEL C and INPUT CHANNEL D. Move the switch to either LINE or PHONO next to the INPUT CHANNEL B or INPUT CHANNEL A on the rear panel of the TRAKTOR KONTROL S4 hardware. Read about the Direct Thru and stand-alone use of the TRAKTOR AUDIO 6 / 10 in this article. Additionally, if you wish to save the Input Sens configuration for future use, perform these changes under the Startup tab. Note: Make sure that the Direct Thru option of the input channels is disabled. In the Channel Setup menu, use the radio buttons under Input Sens for each channel to switch between Phono and Line level.Click on Settings in the Phono / Line section to open the Control Panel.Note: To learn about the use of external audio sources as Live Input signal in TRAKTOR, please consult this video.īefore proceeding, make sure that your TRAKTOR audio interface or controller has been connected and recognized by your system.Ĭlick on the name of your device to learn how to switch the level of its input channels: The PHONO signal level is required when connecting a turntable as part of a TRAKTOR Scratch Timecode vinyl setup or as an external audio source (Live Input) from a vinyl record playing. This article explains how to switch between the LINE and PHONO levels on the input channels of TRAKTOR audio interfaces equipped with this feature.

Download mapping settings for traktor kontrol s8 for traktor pro 3